Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Acer has a track record for doing things a bit differently. The new Acer ProCreator PE320QXT PC monitor is no exception. This 32-inch beast has something no other 6K panel we’ve yet seen can match, namely full touchscreen functionality.
Of course, the 6K native resolution is pretty special all on its own, even if in this case 6K means 6,016 by 3,384 pixels and thus slightly fewer than the likes of the LG UltraFine 6K Evo 32U990A, which clocks in at 6,144 by 3,456 pixels. Nevertheless, you still get an epic pixel density of 219 DPI. That’s far higher than the circa 140 DPI typical of the best 4K monitors in the 32-inch form, and even the 163 DPI of 27-inch 4K models.
Acer ProCreator PE320QXT: Design and features
Image 1 of 3
- Sturdy hinge for touch input
- Big, ugly bezels
- Good connectivity
Specs
Panel size: 32-inch
Panel type: IPS
Resolution: 6,016 x 3,384
Brightness: 400 nits SDR, 600 nits HDR
Contrast: 1,500:1
Pixel response: 4ms GtG
Refresh rate: 60Hz
Color coverage: 99% DCI-P3
HDR: VESA DisplayHDR 600
Vesa: 100mm x 100mm
Connectivity: DisplayPort 1.4 x1, HDMI 2.1 x1, 1x USB-C with 90W PD, 2, USB-A
The touchscreen functionality of Acer ProCreatorPE320QXT has fairly extensive implications for ergonomics, and it’s not all good news. For starters, the bezels are fairly chunky, giving it a slightly dated appearance.
Then there’s the stand and hinge. One the one hand, it’s engineered to support tilting the display across a wide range from vertical to nearly flat to accommodate the touch functionality and, in that regard, it provides good stability. On the other, the hinge only allows for minimal height adjustment when viewing the display normally, and no swivel or pivot into portrait mode.
Then there’s the plastic screen cover which lends the panel a glossy finish. That could be problematic in terms of reflectivity for any creative pros who prefer matte anti-glare coatings.
As for connectivity, the Acer ProCreator PE320QXT has you pretty well covered. Along with the usual DisplayPort and HDMI interfaces, there’s USB-C with 90W of power delivery, plus a two-port USB-A hub.
It’s worth noting that the preferred method of connectivity is USB-C, as that streamlines support for the touchscreen capabilities via a single cable. That said, it is possible to use the supplied USB-A to USB-B cable to connect the display to devices that lack USB-C in order to enable the touch interface.
Speaking of which, the Acer ProCreator PE320QXT comes bundled with an input stylus, though the panel’s capacitive touch interface can also be used with old fashioned finger prods and swipes. Finally, on the features front, is the 8MP webcam with an integrated mic array.
Acer ProCreator PE320QXT: Performance
Image 1 of 3
- Strong color coverage in DCI-P3
- Punchy 6K visuals but lots of light bleed
- Integrated webcam
Ostensibly, touch input is this monitor’s defining feature. But the 6K resolution is also pretty special. Notably, most other 6K monitors currently available use an LG-sourced IPS Black panel. However, as the Acer ProCreator PE320QXT’s very slightly lower resolution implies, there’s something slightly different going on here.
In fact, Acer has opted for the competing AU Optronics panel. It’s essentially the same type technology as the LG IPS Black item found in the LG UltraFine 6K Evo 32U990A. But because AU Optronics tends to price its products more aggressively, monitor models with this panel as opposed to the LG alternative are typically a fair bit cheaper.
Other than the resolution, the main difference is slightly lower static contrast, coming in at 1,500:1 versus the LG’s 2,000:1. In practice, you’d be hard pushed to notice the difference. In neither case is contrast a strong point, especially compared with an OLED panel. Thanks to the HDR 600 certification, there is plenty of punch on offer, but also plenty of light bleed.
In part, that’s thanks to the fact that this monitor lacks proper full-array local dimming. But if light bleed is something all displays of this type suffer from, there’s one flaw that’s very specific to the Acer ProCreator PE320QXT. As a consequence of the touch input layer in the panel, there’s a very slight degradation of the image quality.
It’s most noticeable on close inspection of fonts and texts, lending them a very slightly jagged appearance. How much of a problem this is — and, indeed, if you even notice it — is ultimately a subjective matter. However, given high pixel density and the crisp visuals that implies are core to the Acer ProCreator PE320QXT’s appeal, this flaw is definitely worth noting.
As for the touch functionality itself, well, it’s accurate and responsive enough, albeit the 60Hz refresh rate means that there’s more latency than touch displays with 120Hz and higher refresh rates. That said, driving a 6K monitor at very high refresh rates poses bandwidth issues and likely explains the 60Hz spec. We also had issues with USB-C connectivity with our review unit which made using the touch interface with a Mac impossible. Hopefully, Acer will release a firmware to iron out USB-C connectivity issues.
All that said, color accuracy is definitely a strong point with the Acer ProCreator PE320QXT particularly well calibrated in DCI-P3 mode when connected to Apple Mac computers. For what it’s worth, the HDR mode is well calibrated, too, though without full-array local dimming, this monitor’s HDR capabilities are ultimately pretty notional.
As for the integrated webcam, it has good basic image quality that’s superior to most laptop webcams and also offers a physical shutter for reliable security. However, its optics result in a very wide field of view. It does offer an autoframing feature which crops in pretty effectively. However, that comes at quite a loss of image quality.
Acer ProCreator PE320QXT: Final verdict
Image 1 of 3
We’ve seen displays based on LG’s 6K technology before. But Acer has opted for an alternative panel from AU Optronics that allows a lower price point. That’s particularly impressive given that the Acer ProCreator PE320QXT includes full touchscreen functionality.
The snag is that the touch interface comes with some compromises. Firstly, the ergonomics aren’t great for normal use, thanks to limited height adjustability and added panel reflectivity. The big bezels make the display look a little clunky and dated, too.
The touch layer in the panel also very slightly impacts image quality, which is a pity given that one of the key attractions here is ultra-crisp image quality from the 6K resolution and ultra-high pixel density.
We also had issues with the monitor’s USB-C interface which we’d like to see addressed before this monitor can be recommended without a major caveat. In other regards, this is an impressive display with good connectivity and factory calibration.
Moreover, if you want the combination of 6K and touch support, this Acer represents one heck of a deal. But, ultimately, we’d probably rather see Acer offer this panel without touch support and with a conventional chassis and stand but at an even lower price. Now that would really be something.
Image 1 of 7
For more displays, we’ve reviewed the best business monitors and the best 5K and 8K monitors.
The post Acer ProCreator PE320QXT 6K touchscreen monitor review first appeared on TechToday.
This post originally appeared on TechToday.